|
More Horse Power -
Excellent Running Quality
Optimizes
Fuel - Easy
Installation
Rejet in seconds with a
click of the patented 5 position jet dial
Allows you to run in a
broad temperature or altitude range without rejetting
Automatically
compensates for: air density, motor load, and fuel
quality
Sick and tired of changing jets?
Dial-A-Jet will take care of this problem and a whole lot more!
Why change jetting? Some people don't!
Your engine will lose 10% to 15% of total horsepower with improper jetting. A 100 HP machine will make 85 to 90 HP. The simple fact is that changing jets is not a pleasant task and takes a lot of time.
Now you can run at peak horsepower all the time whether your engine is stock or modified. The best part is that jetting is quick, easy and accurate with Dial-A-Jet.
Dial-A-Jet
fits any carburetor; Keihin or Mikuni, round slide, flat slide or butterfly,
and is easy to install.
Dial-A-Jet IS NOT like a Power Jet. A Power Jet feeds raw liquid fuel, just like the other circuits, and works from 7/8 throttle and up. Dial-A-Jet feeds
emulsified fuel for instant throttle response and works from just above idle to full throttle.
Dial-A-Jet feeds a fine consistent mist of
emulsified fuel instead of raw liquid fuel like all other jetting circuits in your
carb.
Pre-atomized fuel weighs 10% of what raw liquid fuel weighs, therefore, it is very responsive to engine needs.
Dial-A-Jet gives you great throttle response. The
emulsified fuel is delivered to the engine instantly and acts as an intermediate circuit until the heavy wet fuel from the other circuits catch up.
Dial-A-Jet emulsified fuel charge fills in the lean spots between the poorly atomized fuel molecules from other jetting circuits eliminating lean spots.
The lightweight fuel charge follows the path of least resistance, a law of physics. This gives you a consistent, even fuel supply at all engine
RPMs.
Dial-A-Jet allows you to run at peak HP at all temperatures and
altitudes. No other product does this at any price.
Dial-A-Jet is the easiest and fastest way to "tune-in" any modifications you have performed on your machine. From pipes to porting, Dial-A-Jet makes it work right.Dial-A-Jet
will make it easy to jet a piped engine correctly with less fuel on the low
end for crisp throttle response. Dial-A-Jet will automatically raise
the fuel curve as the pipes kick in, giving you a perfectly calibrated
engine from bottom to top.
Dial-A-Jet is a great protection against burn down due to its ability to feed fuel accurately based on the engine's demand.
Dial-A-Jet consistently purges your float bowl of moisture (water, alcohol or
benzenes) as they settle to the bottom. This eliminates water seizures or burn down, carburetor icing, galling or broken intake skirts on your piston.
Dial-A-Jet eliminates detonation/pinging and compensates for poor fuel quality.
Dial-A-Jet allows you to re-jet your entire engine (single, twin, triple or four cylinder) in about one minute.
Dial-A-Jet allows you to tune each cylinder individually for maximum performance.
Dial-A-Jet improves fuel efficiency 10% to
20% or more.
Dial-A-Jet has no moving parts or complicated electronics. It works every time, all the time.
Technical
Article
|
Dial-A-Jet
PATENTED