Woody�s^� Universal Template

The studding experts at Woody�s have designed a template that includes the Trail Template-2, Double Digger� and the Performance Template patterns on ONE TEMPLATE. The Woody�s� Universal Template will have patterns from 48 to 192 studs with exception of the 72 stud pattern. One template gives you the ability to add to your stud pattern without waiting for a different template. Constructed from heavy card stock with a laminate protective cover or clear polycarbonate that will fit 15" wide track configurations. Universal Template is available exclusively from Woody�s. *Patent Pending

Quick facts about the Universal Template:

      �         It is designed for 121� x15� tracks
�         It is available in two forms: Heavy card stock or clear polycarbonate
�         It contains patterns for Trail, Performance, and Double Digger� applications
�         The original Trail Template-2, Performance Template, and Double Digger�
       Templates will remain available while supplies last

The following patterns are included in the Universal Template:

Stud Pattern

48 Studs Single
96 Studs Single
96 Studs Double
120 Studs Single
144 Studs Center Double & Single
144 Studs Center Single
144 Studs Single
168 Studs Single
192 Studs Single
192 Studs Double & Single

Application

Trail
Trail
Double Digger�
Trail
Double Digger�
Performance
Trail
Performance
Performance
Double Digger�

Scratch Lines

6
12
12
13
18
18
16
19
22
22

Part Numbers
Heavy Card Stock - For a limited number of uses
COMB-TEMP

Clear Polycarbonate - For those that will use the template a number of times
COMB-TEMP-P

Below is the studding information included with the template. Be sure to follow all instructions and recommendations when studding a sled.

Decide amount of studs that will work for your application. After choosing pattern, familiarize yourself with letter(s) your pattern requires.

1) Refer to picture on Woody�s Universal Template. Use only pattern that applies to your pattern choice.

2) Place template on track covering 6 lugs. Mark, with Woody�s Track Marker, only the letter locations for your pattern choice (note: using double hole patterns require exact hole locations).

3) Move template to next 6 lugs. Repeat #2.

4) As a precaution, recheck marked pattern on entire track 121� track.
(8 repeats of this 6 bar pattern = 48 lugs)

5) If installing an Angle Support Plate the hole(s) for drilling will be offset from the original pattern holes marked. Center the Angle Support Plate between the lugs over the original pattern marked. Create a new offset mark for drilling in the center of the hole of the Angle Support Plate.

6) Using a 1/4 Woody�s track drill for 7mm studs or 7mm drill for 5/16 studs, drill marked holes (do not drill into idler wheels or other components).

A) Consult owners� manual on track studding.

B) The addition of studs may affect track warranty.

C) Studding may affect track longevity.

D) 192 pattern will create 22 scratch lines.

Woody�s templates are designed to work on tracks that have tunnel protectors centered over the track windows. If your sled has a different location of the tunnel protectors, Woody�s stud patterns are not recommended.

To view the template label, Click Here

( It's big, so be patient! )