Home
The Crank Shop
Digatron
Erlandson Performance
Fabcraft
Holtzman
Hymark
MBRP/B&B Eliminator
RacePak
Racers Edge
Snow Rider
SPORTECH
Thunder Products Inc.
VForce Reeds
Wahl Bros. Racing
Woody's
     Application Guide
     Runners
     Safety
     Studs
     Tech Tips
Dodge
Ford
GMC/Chev

Tech Tip
M1019g


 

Important Studding Issues for All Trail Models of Ski-doo's REV Snowmobiles

Special tunnel protection and stud patterns are required for REV’s that are going to be studded.  Ski-doo has developed two different tunnel protection kits for the REV. The track lug height of the sled will determine the proper kit to use.

For REV’s with the 1” lug track
·        
Ski-doo recommends using the tunnel protection kit part number 861-783-500.
·         Woody’s recommends the following studding procedures:
    • ·  Stud only down the center of the track.
      · 
      Use one of the following patterns from Woody’s Universal Template (Part Number     COMB-TEMP)
      • 96 Studs Single
      • 96 Studs Double
      • 144 Studs Center Single
      • 144 Studs Center Double & Single
    • ·  ONLY USE 1.075” length Woody’s Studs

For REV’s with the 1.25” lug track
·        
Do not stud your sled until Woody’s has completed testing and provides a specific  
       recommendation.

 According to Ski-doo, the tunnel protection kits were scheduled for release in late October or early November of 2002.  Before studding, the proper tunnel protection kit needs to be installed, otherwise tunnel damage will occur.  

Contact your local Ski-doo dealer for more details.

 


REV Tunnel Configuration
 


Published 12/9/2002

Snow West Distribiting Inc.
4291-95 St.
Edmonton, AB. T6E 5R6
Telephone: (780) 436-8888
e-mail:
sales@snowwest.ca

You May Also Visit Us At
www.snowwest.ca
Snow West Distributing Inc.
Copyright © 1998-2003 
All rights reserved.
All Pictures Used 
for Reference only.